Euchner EKS FSA with Ethernet Interface Manuel d'utilisateur télécharger pdf (Page 15)

Manual EKS Electronic-Key Adapter Ethernet

4.4.3 DIP switch S3

Function S3.1 S3.2 S3.3 S3.4

Fixed IP address

OFF OFF

Default IP address 192.168.1.1 ON OFF

Obtain IP address from DHCP server OFF ON

Obtain IP address from a SINUMERIK control system ON ON

Internal function, leave switch OFF OFF

Allow configuration via web browser OFF

= any switch position

Information!

The usage of the DIP switches to assign the IP address is described in the following in section 6.1.1.

4.5 LED indicator

The Electronic-Key adapter operating states are indicated using a 3-color LED on the front.

The illumination of the LED in any color indicates the presence of the operating voltage.

Color Operating state Description

Red

Electronic-Key

adapter power up

or fault

After the application of the power supply, the LED is constantly illuminated red during

power up. The completion of the process is indicated by a change in this state after

approx. 20 seconds. If the LED then flashes red quickly, it is an indication of a network

fault.

Green Ready Network connected.

Yellow

Electronic-Key

active

Network connected. Electronic-Key is in the Electronic-Key adapter.

Red/Green

Red/Yellow

Fault

LED flashing slowly red/green (without Electronic-Key) or red/yellow (with Electronic-

Key). Network was connected and a network fault then occurred.

Information!

LED indications optimized from date of manufacture July 2008.

100420-02-01/09 Subject to technical modifications Page 15/40

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Pas de commentaire

Euchner EKS FSA with Ethernet Interface Manuel d'utilisateur Page 15