Euchner Electronic-Key Adapter with serial Interface Manuel d'utilisateur télécharger pdf (Page 14)

Manual EKS Electronic-Key Adapter serial

088796-02-03/05 Subject to technical modifications Page 14/24

7 Setup

Setup is to be performed in the following sequence:

1. Set the DIP switches on the Electronic-Key adapter

(see page 10 chapter 4.4).

2. Check mounting and electrical connection are correct

(see page 11 chapter 5 Mounting and page 12 chapter 6 Electrical connection).

3. After the power supply is switched on, the LED on the front of the Electronic-Key adapter illuminates green.

This indicates that the power supply is present.

4. Insert Electronic-Key in the Electronic-Key adapter. The LED changes to yellow.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Pas de commentaire

Euchner Electronic-Key Adapter with serial Interface Manuel d'utilisateur Page 14