Euchner EKS FSA with Profibus-DP Interface Manuel d'utilisateur télécharger pdf (Page 13)

Manual EKS Electronic-Key Adapter Profibus-DP

4.3 Pin assignment

4.3.1 Socket, Profibus-DP

PIN Designation Function (according to EIA RS-485)

1 Not used -

2 Not used -

3 RxD/TxD-P Transmit/receive data P, B-wire

4 CNTR-P Direction detection signal for repeater

5 DGND Data ground

6 VP Power supply DC +5 V for termination resistor plug

SUB-D socket

7 Not used -

9-pin

8 RxD/TxD-N Transmit/receive data N, A-wire

9 Not used -

Housing Function earth Electrically connected to the housing

4.3.2 Plug-in screw terminals for power supply

Information!

The coded plug for connection of the power supply is included with the Electronic-Key adapter.

123

PIN Designation Function

1 UB Power supply DC + 24 V

2 0V Power supply DC 0 V

Coded plug, 3-pin

with screw terminals

Cond. cross-section 0.14 ... 1.5 mm²

3 Function earth Electrically connected to the housing

Tightening torque 0.22 Nm

4.3.3 Plug-in screw terminals for outputs LA1/LA2 and LB1/LB2 (EKS FSA only)

Information!

The coded plug for connection of the outputs is included with the Electronic-Key adapter.

Channel Pin Function

Normally open contact

channel LA

Coded plug 2 x 2-pin

with screw terminals

Normally open contact

channel LB

Cond. cross-section 0.14 … 1.5 mm²

Tightening torque 0.22 Nm

092009-03-10/07 Subject to technical modifications Page 13/36

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Pas de commentaire

Euchner EKS FSA with Profibus-DP Interface Manuel d'utilisateur Page 13