Euchner ActiveX Module serial/USB Manuel d'utilisateur télécharger pdf (Page 10)

Manual EKS ActiveX

Module serial / USB

3.5 Properties

3.5.1 BaudRate

 Description Sets the baud rate

 Syntax object.BaudRate = BaudRateConstants Value;

 Comments Using this property the same baud rate must be set as was selected on the EKS using

the DIP switches. Possible values are:

EKS_BAUD_9600 = 9600

EKS_BAUD_28800 = 28800

This property is applied by calling the method Open.

 Data type BaudRateConstants (Enumeration)

 Default value EKS_BAUD_9600

3.5.2 Port

 Description Selects the serial interface on the PC

 Syntax object.Port = String Value;

 Comments Possible values are:

COM1

COM2

…

This property is applied by calling the method Open.

 Data type String

 Default value COM1

3.5.3 KeyType

 Description Defines the type of Electronic-Key used (read-only Electronic-Key* or read/write

Electronic-Key)

*Earlier transponder type. We do not recommend using this transponder type in new installations.

 Syntax object.KeyType = KeyTypeConstants Value;

 Comments Possible values are:

EKS_KEY_READWRITE = 1

EKS_KEY_READONLY = 8

This property is applied by calling the method Open.

 Data type KeyTypeConstants (Enumeration)

 Default value EKS_KEY_READWRITE

Page 10/20 Subject to technical modifications 098655-03-10/12

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Pas de commentaire

Euchner ActiveX Module serial/USB Manuel d'utilisateur Page 10