Euchner AS-i 3.0 Command Interface Manuel d'utilisateur télécharger pdf (Page 14)

AS-i 3.0 Command Interface Commands of the Command Interface

Subject to reasonable modifications due to technical advances Id.-No.: 102875 Issue date - 3.12.2007 EUCHNER GmbH + Co. KG

Kohlhammerstraße 16, D-70771 Leinfelden-Echterdingen Tel. +49/711/7597-0, Fax +49/711/753316

4.1.5 Read 4 16-bit Slave in. Data (RD_7X_IN_X)

With this command, the four 16-bit channels of 4 AS-i input slaves with successive

addresses according to slave profile (S-7.3, S-7.4, S-7.5, S-7.A.8, S.A.9, S-7.A.A)

can be read.

4.1.6 Write 4 7.3 Slave out. Data (WR_7X_OUT_X)

With this command the four 16-bit channels of four AS-i output slaves with succes-

sive addresses according to slave profile (S-7.3, S-7.4, S-7.5, S-7.A.8, S.A.9, S-

7.A.A) can be written.

Request

byte

153

2T – circuit

3 – 0 1st slave address

Response

byte

153

2T result

3 1st slave, channel 1, high byte

……

34 4th slave, channel 4, low byte

Request

byte

154

2T – circuit

3 – 0 1st slave address

4 1st slave, channel 1, high byte

……

35 4th slave, channel 4, low byte

Response

byte

154

2T result

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 97 98

Pas de commentaire

Euchner AS-i 3.0 Command Interface Manuel d'utilisateur Page 14