Euchner AS-i 3.0 Command Interface Manuel d'utilisateur télécharger pdf (Page 30)

AS-i 3.0 Command Interface Commands of the Command Interface

Subject to reasonable modifications due to technical advances Id.-No.: 102875 Issue date - 3.12.2007 EUCHNER GmbH + Co. KG

Kohlhammerstraße 16, D-70771 Leinfelden-Echterdingen Tel. +49/711/7597-0, Fax +49/711/753316

4.3.3.13 Command 15: "Safety Status"

With this command the status of safety monitors (external and integrated) in the

version 2 can be read.

Request buffer

Byte

1 reserved 00

Response buffer

Byte

1 reserved 00

OSSD 1 state

1. see table "Coding of status byte", page 30

OSSD 2 state

2. see table "Coding of status byte", page 30

... ...

OSSD n-1 state

3. see table "Coding of status byte", page 30

Coding of status byte

Bit [0 ... 2] state and/or colour

0 green permanent light

1 green flashing

2 yellow permanent light

3 yellow flashing

4 red permanent light

5 red flashing

6 grey and/or off

7 reserved

Bit [6] state and/or colour

0 no device flashes yellow in this OSSD

1 at least one device flashes yellow in this OSSD

Bit [7] state and/or colour

0 no device flashes red in this OSSD

1 at least one device flashes red in this OSSD

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 97 98

Pas de commentaire

Euchner AS-i 3.0 Command Interface Manuel d'utilisateur Page 30